我欲封天耳根小说,盗墓笔记txt全集下载,殿上欢

Daily maintenance of BYD workshop forklifts includes:- There are three main reasons for this problem When the solenoid, manual reversing valve, or one-way valve is blocked by waste or the sealing ring is worn, causing internal leakage in the equipment, the valve components must be cleaned and the worn seals replaced in time during daily use

Pay attention to driving speed because slippery areas can easily cause side sliding

The new version of the regulations requires the installation of safety monitoring devices

Automatic power-off function: When the forklift stops for more than 10 minutes, the power switch can be automatically cut off regardless of whether the key switch is closed

It is also called an electric pallet truck

Rotate the travel button one after another to move the electric pallet truck backward

When welding, the ambient temperature should be above 0℃

, Ltd

First, let me tell you what is the rated center distance

During the unloading process, rapid descent and unloading are strictly prohibited; 12

Daily maintenance of BYD workshop forklifts includes:- The telescopic fork is designed with a mid-position detection sensor and a travel limit sensor

In short, the development history of forklifts reflects the economic development curve

After confirming that there is no abnormality in the safety detection sensor at the loading point, the loading platform is lifted to the corresponding height 6

Generally, there are two specifications for the truck: the wide one is 685MM in width, the fork length is about 1200, and the general pallet size is 1200*1200mm; the narrow one is 550MM, the fork length is 1100MM, and the applicable pallet is 1000*1000

8-46 tons, gasoline forklift: 1-7 tons, electric forklift: 0 Therefore, it is necessary to regularly check the rigid connection and main load-bearing components of the forklift The truck manufacturer tells you that the third reason is that the battery is not fixed firmly, and it is caused by vibration caused by dragging

280g/cm3; adjust the engine oil in time, install insulation measures when the equipment is working on site, install oil preheating device when necessary, and start the engine regularly to preheat each part of the working system

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

The electric transport truck manufacturer will tell us its use and function

1 (5) Readjustment of air gap: The rated air gap Z will increase due to wear

Daily maintenance of BYD workshop forklifts includes:- Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging

(4) When turning, if there are pedestrians or vehicles nearby, you should signal and refrain from making sharp turns at high speeds

Energy saving and environmental protection, simple and convenient operation

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required

BYD forklift solutions for the logistics industry with high-intensity handling: In the logistics industry, cargo loading and unloading is a relatively normal part of the work

Forklift operator certificate: Article 38 of the Regulations on Safety Supervision of Special Equipment states: "Operators and relevant management personnel of boilers, pressure vessels, elevators, lifting machinery, passenger ropeways, large amusement facilities, and special motor vehicles within the site (factory) shall be qualified by the special equipment safety supervision and management department in accordance with relevant national regulations and obtain a special operation personnel certificate in a unified national format before they can engage in corresponding operations or management work

When charging the battery, pay attention to the method, so that the battery is fully charged, but not overcharged

After-sales service is the key, and you must choose a brand with good after-sales service

When the cargo width, length, and height exceed the limit, an alarm signal will be issued; ② The loading platform is designed with sensors to determine whether there is a pallet and whether it is empty or full; ③ In the hydraulic system, a pressure detection sensor is designed

However, only the tutorial is useless

If the operator mistakenly operates the direction backward and the body does not have time to avoid, the operating arm and the body will collide, the control switch will be closed, and the electric pallet truck will brake urgently

As for the preventive measures, they are not without them

Before moving the forklift, you must check whether the brakes and batteries are fully charged

When loading and unloading goods, dragging the pallet on the ground will cause scratches on the ground

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info