小说阅读网,完美世界国际版下载,欢乐颂小说txt

BYD cold storage battery forklift charging process picture-

Warm reminder: In addition to common models, non-standard customization can also be carried out according to the user's site, environment, cargo, and load to meet the needs of special environment

(4) When turning, if there are pedestrians or vehicles nearby, you should signal and refrain from making sharp turns at high speeds

If it is inconvenient to tilt the mast backward for some special goods, the mast should be kept vertical and it is forbidden to tilt the mast forward during driving

Based on years of professional experience, we proposed an innovative solution: using two electric motors and corresponding gearboxes

Considering that the forklift needs to enter the container for operation, the height of the forklift mast is also considered

Hydraulic system measures It is suitable for ordinary forklift lifting cylinders at room temperature

If necessary, use a soft, lint-free, clean white towel to clean the carbon powder on the surface of the phase change groove and the motor commutator

If the lifting height of the fork does not reach the required height, add hydraulic oil The speed limit when carrying goods in the warehouse is 5KM/h

The use of upright motors makes the inspection and maintenance of motors, brakes, etc

In this case, we must pay attention to the battery temperature not being too low when charging the electric forklift in a low temperature area It can transform static cargo into dynamic cargo and is a kind of movable "ground" When using electric forklifts in winter, the most important thing to pay attention to is battery maintenance

BYD cold storage battery forklift charging process picture- (9) When the forklift is in operation, the load must be in the lowest position that does not hinder the driving, the mast should be tilted back appropriately, and the load must not be raised except when stacking or loading If there is no abnormality during the retraction of the fork, after the fork returns to the middle position, in order to lower the center of gravity of the unmanned forklift, ensure the smooth and safe operation, and take into account the efficiency of cargo storage, the loading platform will fall back to 800mm above the ground

Unmanned forklifts are more efficient, more stable, more accurate and safer than forklifts

Therefore, it is easy to make mistakes when you have to twist your neck to check the reversing road conditions

Longer service life: The power module is made of imported high-quality lithium batteries, chargers and controllers, and is made of one-time injection molding technology

0 to 52

(3) Ensure that the battery pack has sufficient power

Safety testing plan The system safety inspection of intelligent three-dimensional storage is a prerequisite for the normal operation of the project and is also a key design object

Nameplate of electric pallet truck The nameplate contains the vehicle model, rated lifting capacity, maximum lifting height, deadweight, and factory serial number

The fill welding work starts from the drilled hole to the other end of the crack, and the weld is also welded on the reverse side

With the rapid development of e-commerce, the requirements for forklift equipment are getting higher and higher

Moreover, unlike manual trucks and semi-electric trucks, it is equipped with a standing board, which allows you to stand and drive without using manpower

In addition, each supplier will emphasize some technical innovation and design in the security protection details of their products, but as long as the previous ones are basically determined, these are things to be considered based on the procurement costs

Electric pallet trucks can be divided into two categories: semi-electric transport trucks and full-electric transport trucks

This is especially true on a slope, otherwise there is a risk of rollover

BYD cold storage battery forklift charging process picture-

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

The truck manufacturer tells you that the third reason is that the battery is not fixed firmly, and it is caused by vibration caused by dragging AGV is applied to forklifts, and the AMS automated management system, AGV hardware equipment and management system (NDC) are established to build a full-process logistics management system, realize dynamic monitoring of warehouse goods, and realize the traceability and visualization management of logistics transportation The requirements of the logistics industry for the forklift industry are high strength, long service time, large load, stable performance, high degree of automation and intelligence, and low noise

Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment

In the production of circuits and parts, some manufacturers use inferior accessories to reduce costs

Product Introduction: 1

It is the simplest, most effective and most common loading and unloading and handling equipment in the warehousing, logistics and supermarket industries

According to relevant logistics industry insiders, forklifts need to have high-intensity performance, are not prone to failure, and can ensure the intensity of sustainable operations

(11) It is prohibited to turn on a ramp, and you should not drive across a ramp

Improve operating efficiency Fast charging mode: 1-3 hours fast charging mode is suitable for multi-shift work

(9) It is prohibited to use a forklift to lift people to perform work at heights to avoid accidents of falling from heights

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info