欢乐颂第二季,君子以泽,完美世界有声小说全集

BYD reach battery forklift series- Since it involves indoor and outdoor operations, the two configuration ratios are considered 2

The above is the editor's compilation of common fault troubleshooting methods for electric transport trucks

The rolling clearance of the inner and outer door frames shall be adjusted reasonably and shall not be greater than 1

Step 7: Reverse and leave the working position

Because the electric transport truck is a very common warehouse electric pallet truck, it can be seen in many occasions

Low operating cost With the increase in international oil prices, the operating cost of electric forklifts is lower than that of fuel forklifts

(10) The forklift is steered by the rear wheels, so you must always pay attention to the swing of the rear wheel to avoid turning too sharply, which is common among beginner drivers

Check whether the synchronous motor rotates flexibly and whether there is false friction

The double forks should be inserted in parallel, and the pallet should not be distorted for operation

Prevent such accidents from happening again! 1

The electronic scale pallet truck is designed and developed for mobile weighing, combining cargo handling and weighing into one, and is suitable for use in the food industry

BYD reach battery forklift series- (3) Release the operating arm and it will automatically return to the parking brake position 3

The forklift editor reminds everyone that operating a forklift requires professional theoretical and practical training

When turning left, the vehicle turns left; when turning right, the vehicle turns right Except for a few warehouse forklifts (such as manual pallet forklifts) that are powered by manpower, the others are driven by electric motors The AC drive system makes the electric transporter more responsive, more accurate in control and more stable in operation

The steering system, hydraulic control system, and acceleration and braking system are all transmitted by electrical signals, which greatly reduces the workload of operators and is very helpful in improving their work efficiency and accuracy

2 times the maximum load, the relevant test data corresponding to the lifting capacity meet the on-site requirements, and the high-position fork entry is safe and reliable Paper tube pallet truck is used for transporting warp beams of water jet looms, and can also be used for transporting paper tubes and paper rolls Impact of low temperature environment on mechanical system Lubricating oil and grease used at room temperature will also change their properties at low temperatures and are not suitable for use in cold storage environments; specially designed accessories are also required on precision components such as micro-openings, sensors, precision bearings, etc For operator safety and comfort, the Hyster S2

Nameplate of electric pallet truck The nameplate contains the vehicle model, rated lifting capacity, maximum lifting height, deadweight, and factory serial number

In this case, we must pay attention to the battery temperature not being too low when charging the electric forklift in a low temperature area

The new version of the regulations requires the installation of safety monitoring devices

According to the response from Anhui Yufeng Warehousing Business Department, many customers are now calling to inquire about matters such as electric transport truck agents and electric pallet truck wholesales

BYD reach battery forklift series- The auxiliary wheels are usually screwed on and can be replaced by loosening the screws

It is preliminarily estimated that the national output of electric forklifts in 2020 will be about 380,000 units

There are great differences in the structure of the drive system of various forklifts, and there are also differences in the form of single-machine layout

The technological progress of computer-integrated manufacturing systems and the widespread use of automated warehouses have enabled AGV to develop rapidly

There is no need to add water or acid to lead-acid batteries, which greatly reduces the workload and saves labor costs and material costs; 2

Understanding the formula for calculating the aisle width of electric hydraulic forklifts can not only help companies make better use of factory buildings and design aisles reasonably and scientifically, but also provide a reference for companies to purchase electric forklifts

What should you pay attention to when operating a forklift in winter? Do not operate the hydraulic system before the hydraulic control system oil becomes hot, otherwise the hydraulic components will be damaged, and in severe cases, a pump explosion accident will occur

In addition, by optimizing the control strategy, adjusting the start-up stability of the drive wheel and the followability during sharp turns, it is ensured that the forklift will not slip even when driving on a wet and slippery indoor ground, and avoid overturning during sharp turns, effectively ensuring the safety of the operator

Next, let's take a look at the special requirements for using electric forklifts in winter

Before this, many electric pallet truck buyers came to find out the cause of the electric pallet truck failure

Do not use braking inertia to release round or easily rolling goods; 6

Explosion-proof pallet trucks are generally used in some dangerous places with very high safety requirements, such as factories with a lot of dust, gas stations, gas stations, and chemical industries, or in the workshops of some electronics factories that are very sensitive to electronic interference

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info