完美世界小说下载,有声读物,我欲封天耳根小说零

BYD explosion-proof electric forklift sales center- The air gap can be adjusted multiple times

From the current situation, the technical development direction of electric forklifts mainly includes the following aspects: (1) Lithium electrification Driven by multiple factors such as the acceleration of forklift electrification, the continuous decline in the price of power lithium batteries, and increasingly strict supervision of the lead-acid industry, the lithium electrification of forklifts has become an obvious trend in the development of the industry

However, battery forklifts have the advantages of environmental protection, less noise, small turning radius, and low operating cost

(9) When the forklift is in operation, the load must be in the lowest position that does not hinder the driving, the mast should be tilted back appropriately, and the load must not be raised except when stacking or loading

When the forklift stops working and you get off the vehicle, you must turn off the engine, remove the key, and pull the handbrake; 4

Battery maintenance is also very important, and there are many details that need to be paid attention to

High efficiency and energy saving: it has great advantages over similar products; 2

The electric walk-behind warehouse truck is the third type of forklift (III) in the classification of the World Industrial Truck Statistics Association

(3) Ensure that the battery pack has sufficient power

5 (4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same Fuel forklifts have sufficient horsepower and great strength, but they are noisy and produce high exhaust pollution during use During storage, it should be kept clean and avoid moisture and harsh climate environments

Overloading is not allowed; 5

BYD explosion-proof electric forklift sales center- However, no matter how good the equipment is, if it is not properly maintained, it will frequently malfunction and its service life will not be long

Whether solid tire, drum spreader, transverse or similar

Electric transport trucks are commonly used in modern factory warehouse handling work

The first is three-dimensional warehousing based on rail stackers, which is mainly used in scenarios with long aisles and high shelves

Electric forklift manufacturers adjust speed, which is relatively complicated, has high requirements for AC operation, must be used for a long time, and the price is also high In summary, the synchronization of the mechanical structures of the four cylinders is finally achieved

are important but easy to understand, so I won’t go into details here

To prevent this problem, truck manufacturers recommend that you try to avoid overcharging, monitor the temperature of the electrolyte during charging, and do not use electrolytes with too high a relative density Oil replacement in hydraulic system We recommend that you replace the hydraulic oil once the machine is in operation (or when the operation time reaches 2000 hours), using 45# high-strength hydraulic oil or similar oil Mast: At present, most electric forklifts have adopted wide-view masts, and the lifting hydraulic cylinders are placed on both sides instead of in the middle

When an electric truck is used with a pallet, the pallet should be selected based on the load range and configuration of the electric truck and the material and specifications of the pallet

Without flexible lifting and handling tools, it is impossible to move goods by manpower alone In terms of the sturdiness of the pallet, the nine-leg and Sichuan-shaped pallets are most suitable for electric transport trucks In a cold storage environment, the temperature difference will cause water droplets to form inside the cylinder and rust, affecting the operation of the lifting cylinder

BYD explosion-proof electric forklift sales center-

② Raise the fork to the top position to check whether the hydraulic oil in the hydraulic system is sufficient

The use of electric pallet forklift is not difficult, it is nothing more than practice makes perfect

The application scenario guarantees the confidence of the product

It uses a small-volume hydraulic device, which is simple to operate and easy to use The certificate holder shall submit a review application to the issuing department three months before the expiration of the review period In this way, the forklift can be lifted slightly to a certain height after picking up the goods and then retracted, ensuring the stability of the forklift during operation

(1) When loading items on a fork, the distance between the two forks should be adjusted as needed to ensure that the load on the two forks is balanced and not skewed

High-position side fork detection: Test the stability of the side fork at different loads, different side fork heights, and different fork entry speeds Among forklift companies, in addition to BYD, which was involved in lithium-ion forklift technology earlier, since 2018, many mainstream forklift OEMs such as Anhui Heli, Hangcha Group, and Noli have also actively introduced the application of lithium batteries

Nowadays, many warehouses will purchase pallets before purchasing shelves so that forklifts can carry out transportation operations

It is forbidden to park the counterbalanced forklift in the moving area, and it is strictly forbidden to stand on the forks or pallets of the counterbalanced electric forklift

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info