欢乐颂小说结局是什么,有声小说下载,大主宰

BYD high forklift manufacturer, customizable- For the forklift market, the popularity of electric forklifts is getting wider and wider

Companies in northern regions should pay more attention to this

The DC motor must be configured

Technological innovation is needed to address and solve various technical problems of cold storage forklifts 4

It can be seen that forklifts have their own unique advantages

Rotate the travel button one after another to move the electric pallet truck backward Slowly accelerate to the ideal speed

In simple terms, lifting and moving are all achieved by electric drive

Factory operators are basically able to operate the equipment skillfully, but rarely can they solve the faults in the use of the equipment in a timely manner

There is an emergency power-off button on the vehicle body, and there are lift buttons and forward/reverse buttons on the handle

Low maintenance cost: 1-year warranty for the whole vehicle, free repair within 1 year, and replacement with a new vehicle within 3 months; 8

The editor of New Energy Forklift will share it with you below: What are the operating procedures for electric forklifts? 1

The power supply of an explosion-proof electric forklift is provided by an explosion-proof battery

BYD high forklift manufacturer, customizable-

The system has different driving force modes, which allows the vehicle to flexibly give full play to its characteristics under various loads, improve energy utilization efficiency, and be more environmentally friendly and energy-saving

Find out the warranty period for new vehicles Battery maintenance is also essential to ensure the service life of the electric forklift Use of charger ①The charger we equip for stacker trucks has excellent constant current characteristics and extremely fast overcurrent protection capabilities

The oil pumps and valves of the hydraulic system are all packaged at low temperatures, and the hydraulic hoses are made of low-temperature resistant rubber materials to effectively prevent hose degradation and hydraulic function abnormalities caused by low temperatures; in addition, due to the change of the hydraulic working oil, the viscosity of the hydraulic working oil also changes at low temperatures, so the hydraulic oil pump used for lifting should also use an ultra-low temperature hydraulic oil pump

Regardless of whether the battery has obvious temperature changes during the charging process, the electrolyte will not be turbid, which extends the service life

Light working conditions, heavy working conditions

While it brings fast handling to warehouses, docks, airports and other places, it also requires everyone to be cautious and careful with the operation of forklifts

The driver must study it carefully

For example, Anhui Heli, Anhui Wannan Motor Co

It is often used in ports, stations, airports, freight yards, warehouses, distribution centers and other places

② Check and tighten any screws, nuts, and battery cable connections that may be loose

The most prominent advantage is that lithium batteries do not need to be watered, and under normal use, they do not need maintenance It is strictly forbidden to use in blind areas; 9

How to choose? It is not enough for enterprises to consider their own needs, but also to consider how to use them with electric transport trucks

BYD high forklift manufacturer, customizable-

In this case, we must pay attention to the battery temperature not being too low when charging the electric forklift in a low temperature area

The uses of transport trucks produced by different manufacturers are different, which requires drivers to slowly adapt

Electric trucks save time, effort, energy, cost and efficient operation

Manual and automatic full proportional control; 2

The reduction in contacts can effectively reduce the maintenance cost of electronic components

After arriving at the destination, the chassis is lowered by hydraulics, and the goods fall to the ground with it, so the transport vehicle can be easily pulled out, eliminating the complicated process of manual handling

The highest temperature of the surrounding gas is 40℃ and the lowest temperature is -25℃

The second is to refer to the manufacturer's positioning

At this time, the battery must be unplugged

Among them, the corrosive environment inside the forklift, such as the high temperature generated by the engine and the combustion exhaust gas containing sulfur and chloride ions, the acid mist and leakage generated by the battery, the stress generated by vibration and impact during operation, and the local damage caused by friction and collision are the main reasons for the corrosion damage of forklift parts

(4) When a forklift approaches or removes objects, the vehicle speed should be slow and steady, and care should be taken not to crush objects, wooden mats, etc

The following BYD forklift editor will share with you the precautions for using a forklift: 1 2 Carrying goods within the reasonable load range of the explosion-proof electric transporter has high carrying efficiency and saves transportation time

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info