完美世界国际版下载,择天记,遮天

BYD stand-up electric forklift maintenance and maintenance methods - Everyone was focusing on production, cost, price, channels, and sales, but the investment in the introduction of high-tech talents and product research and development was obviously insufficient

(3) After unloading, the forks should be lowered to the normal driving position before driving

The working pressure of the equipment's overflow valve is not enough and needs to be adjusted

Before working every day, you should first check the following safety features: ※ The speaker functions normally

If the air gap exceeds the maximum air gap value, it may cause the brake to fail to release, the friction brake pad to burn out, the braking force or holding force to decrease, and even cause a major accident

Electric pallet trucks are also called electric pallet trucks or electric transport trucks

Forklift bearing broken The forklift bearing is a very important hardware component on the forklift As early as 2015, the "Guiding Opinions on Accelerating the Development of Life Service Industry and Promoting the Upgrading of Consumption Structure" issued by the State Council clearly pointed out: Actively develop new logistics service models such as cold chain logistics and integrated warehousing and distribution

The outriggers are relatively high and have two wheels at the front end

If there is any abnormal sound, perform fault detection in time and do not operate with faults

Widely used in major workshops, transfer centers, etc

BYD stand-up electric forklift maintenance and maintenance methods -

Industry-leading electronic control system: Equipped with the industry's leading intelligent electronic control system, the angle sensor makes the forklift operation convenient, fast and efficient

When the counterbalanced electric forklift is on a curved road or narrow aisle, or when passing through a door or an irregular road surface, the operator must slow down

(1) Ordinary internal combustion forklifts: They are generally powered by diesel, gasoline, liquefied petroleum gas or natural gas engines

Common parameters of explosion-proof electric forklifts 1, Ltd

Mastering these methods during daily use can shorten the time for equipment failure repair and reduce maintenance costs

It is strictly prohibited to load and unload the counterbalanced forklift manually to avoid safety problems

If any abnormal condition is found in the forklift, stop and check it immediately

The third step is to adjust the height of the forks

Since it is pollution-free and has low noise, it is widely used in indoor operations and other working conditions with high environmental requirements, such as medicine, food and other industries

The use of upright motors makes the inspection and maintenance of motors, brakes, etc How can the driver accurately insert the cargo when the forklift is raised so high? With an obstructed vision, the driver has to stretch his neck like a giraffe, and still relies on feeling

BYD stand-up electric forklift maintenance and maintenance methods -

7-3

When heating, the heating area should be minimized, the heating temperature should be lower than 700℃, and it should be cooled slowly to avoid increasing brittleness

Pay attention to the working voltage of the ammeter

However, the biggest differences between forklift motor drive systems are as follows: 1

With the continuous development, promotion and application of logistics technology, and the continuous improvement of the country's industrialization level, the scope of use of forklift products will be increasingly expanded, becoming a loading and unloading, warehousing and handling machinery with the largest output and specifications

Forklift operator certificate: Article 38 of the Regulations on Safety Supervision of Special Equipment states: "Operators and relevant management personnel of boilers, pressure vessels, elevators, lifting machinery, passenger ropeways, large amusement facilities, and special motor vehicles within the site (factory) shall be qualified by the special equipment safety supervision and management department in accordance with relevant national regulations and obtain a special operation personnel certificate in a unified national format before they can engage in corresponding operations or management work

Warehouse electric forklifts should slow down when turning, pay attention to the contact and collision between the goods in front and the rear of the vehicle, and turn slowly

The research and development, design, manufacturing and modification of the AGV body were independently completed Which type of transporter is more suitable for them? Below, the electric transporter manufacturer will analyze the pros and cons of the two

They have been tested and mass-produced by more than 30 vehicle companies including Anhui Heli, Hangcha Group, Longgong, Noli, Baoli, etc

Whether it is lead-acid batteries or lithium batteries, electric transport truck manufacturers can provide them to everyone, and recommend the most suitable electric transport truck and batteries that match it according to the company's own needs

When driving outdoors, the speed should not exceed 10km/h

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info