遮天,玄幻小说完本,盗墓笔记txt全集下载

What are the maintenance contents of BYD warehouse trucks?- As the main model of traditional forklifts, counterbalanced forklifts have long occupied half of the forklift market with their unique advantages The wheel groove wear shall not be greater than 10% of the original size 2

Forklift operator certificate: Article 38 of the Regulations on Safety Supervision of Special Equipment states: "Operators and relevant management personnel of boilers, pressure vessels, elevators, lifting machinery, passenger ropeways, large amusement facilities, and special motor vehicles within the site (factory) shall be qualified by the special equipment safety supervision and management department in accordance with relevant national regulations and obtain a special operation personnel certificate in a unified national format before they can engage in corresponding operations or management work

Usually pay attention to the following points: 1

Maximum lifting height: 6m 4

6 Before moving the forklift, you must check whether the brakes and batteries are fully charged

The most basic question in the inquiry about electric transport trucks should be about the operation of electric transport trucks

In the following years, Zhongli continued to innovate and launched products with innovative design concepts such as "Big King Kong" and "Micro King Kong" Next, let's see how to do it specifically

Generally, there are two specifications for the truck: the wide one is 685MM in width, the fork length is about 1200, and the general pallet size is 1200*1200mm; the narrow one is 550MM, the fork length is 1100MM, and the applicable pallet is 1000*1000

It can be used to work better in our warehouses and improve work efficiency

Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging

What are the maintenance contents of BYD warehouse trucks?- The price of imported forklift products is slightly higher

It is not allowed to use inertia to unload; 3

Equipped with forklift drivers with forklift driving license to avoid having multiple drivers for one forklift

The former is electrically controlled for driving and lifting, which is more labor-saving The load capacity has been greatly improved compared to the traditional counterbalanced forklift AGV, with a rated load of up to 3 After lowering the forks to the lowest position, withdraw the electric pallet truck

Different types of equipment have relatively large differences in configuration and parameters, and are suitable for different places of use

The key parameters of unmanned forklifts involved in this article are shown in Table 1: Among them, in order to effectively reduce the width of the stacking channel, the minimum stacking channel width was reduced from the traditional 3 meters to 1

2M, 1

When approaching the goods, it should stop first, wait until the position is clear, and slowly align the double forks with the goods

It can be used immediately after charging, eliminating the time and safety risks of replacing batteries

In addition, the heat of AC motors mainly occurs in the stator coils of the motor housing, which is convenient for cooling and heat dissipation

Electric counterbalanced ride-on forklifts and electric ride-on warehouse forklifts still have a lot of room for improvement

It plans to increase the promotion and publicity of such products in 2020 to accelerate market penetration

What are the maintenance contents of BYD warehouse trucks?-

When the electric forklift is operating in the warehouse, it should be avoided that the forklift is driving and lifting at the same time 9

4 It integrates power, braking, differential, and load-bearing in one, and has speed, temperature and other sensor interfaces, which is more conducive to intelligent control Key design parameters The key design parameters of unmanned forklifts mainly include: maximum cargo weight, maximum cargo size, load center distance, minimum stacking channel width, maximum lifting height, maximum deflection of the fork end, maximum travel speed, and maximum lifting speed with full load

One common sign is abnormal noise

Before continuing to operate, the direction selection switch must be restored to the middle position

Among them, the maximum spacing between the 4 oil cylinders exceeds 1

Check the hydraulic pump, oil pipe, joints and oil seals to see if there is any oil leakage

What should I pay attention to when using an electric transport truck? What should I pay attention to when using an electric transport truck? Electric transport trucks are also called electric pallet trucks in the industry

Consider the needs of the standard forklift first

If the welding current enters the battery, it will cause damage

The operator must stay away from non-staff members in the counterbalanced forklift's working area and immediately issue a warning if there is any danger

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info