女强穿越玄幻完结小说,小说阅读网站,盗墓笔记小说下载

BYD four-point electric forklift maintenance price- Warehouse forklifts are widely used in the warehousing industry because of their compact body, flexible movement, light weight and good environmental performance

The battery fluid should be supplemented with distilled water in time

If the lifting height is too high, whether it is a three-section mast or a two-section mast, the mast height is about 2

Are you clear? Please pay attention to our official website to get more information about BYD forklifts

When driving at an intersection, you must slow down, honk the horn, and confirm the KY; 3

If the bending and twisting deformation of the electric forklift mast is small, it can be corrected by cold correction with static load Drive device with brake It is equipped with an electromagnetic powered brake, a travel motor, a gear box and a driving wheel, and a steering bearing is arranged between the driving motor and the gear box

The minimum mast tilt should be used to stabilize the load to prevent the load from sliding backwards

Check whether there is any fault in the drive motor system

In November 2018, Hangcha Group released a new product, the XC series new energy electric forklift, developed in cooperation with Contemporary Amperex Technology Co The forklift editor reminds everyone that operating a forklift requires professional theoretical and practical training

BYD four-point electric forklift maintenance price-, Ltd Applicable to various workplaces: such as factory workshops, docks, warehouses and other places for cargo loading and unloading If it is higher than the standard value, it indicates that the charging voltage is too high

If the forklift is also treated as a cloud forklift, the handling volume of unmanned warehousing will increase exponentially

Considering that there is no unified standard for calculating the height of electric forklifts, electric forklift manufacturers may not be able to match the shelf height with the lifting height of the forklift, and companies are required to provide detailed data based on their own circumstances Considering that there may be cylindrical goods, large cotton bales and other goods in the warehouse that need to be handled, it is necessary to add attachments such as grippers, and also consider whether hydraulic pipelines are reserved when the forklift leaves the factory

, Ltd

Check whether the electronic control board is damaged

Explosion-proof pallet trucks are generally used in some dangerous places with very high safety requirements, such as factories with a lot of dust, gas stations, gas stations, and chemical industries, or in the workshops of some electronics factories that are very sensitive to electronic interference

If the lifting height is too high, whether it is a three-section mast or a two-section mast, the mast height is about 2

The correction method can be used to eliminate the deformation of the mast of the electric forklift

Safety production education, You must drive with a license, and illegal operation is strictly prohibited

Under the same battery capacity, the communication system will last longer; currently, most of the equipment used in logistics distribution centers, warehouses, workshops, etc

BYD four-point electric forklift maintenance price- During operation, the amount and weight of the operation must be controlled according to the correct operating specifications and operating sequence

Say goodbye to the traditional camera that needs to be connected to the power cord, and you no longer have to worry about lifting and twisting the wire

Today, electric transport truck manufacturers will tell you how to choose pallets for electric transport trucks

At the same time, it can meet the production needs of various electric forklifts and non-standard forklifts

Electric pallet trucks have the advantages of energy saving, no exhaust emissions, and low noise

Clean the mud and other attachments on the outer shell regularly to avoid interfering with heat dissipation

Common parameters of explosion-proof electric forklifts 1

Since most internal combustion forklifts are used in ports, docks and working places, the environment in which they are used is relatively harsh, especially in the port and nursing industry

Before continuing to operate, the direction selection switch must be restored to the middle position

Oil replacement in hydraulic system We recommend that you replace the hydraulic oil once the machine is in operation (or when the operation time reaches 2000 hours), using 45# high-strength hydraulic oil or similar oil

Turn the accelerator forward to move the forklift forward, turn the accelerator backward to move backward, and return the accelerator to the middle position to stop When the counterbalanced electric forklift is on a curved road or narrow aisle, or when passing through a door or an irregular road surface, the operator must slow down Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions Slow driving function: put the handle in a nearly vertical state, and the driving speed will automatically decrease, making it easier to operate in narrow spaces

As a short-distance cargo transportation vehicle, they often carry heavy cargo

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info