有声读物,完美世界辰东,小说阅读网

BYD warehouse electric forklift maintenance and repair schedule flow chart - Forklifts are special equipment used in industrial and logistics warehouses Step 6

Mast: At present, most electric forklifts have adopted wide-view masts, and the lifting hydraulic cylinders are placed on both sides instead of in the middle

As for the third type of electric technology forklifts, they have not yet been put on the market in large quantities 1

With the increase in participants, the market competition for this type of product will become more intense in the future

This is actually the case when we buy any goods

It does not mean that electric pallet trucks have the advantage of being easy to operate and can be directly operated after purchase

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

Is only horizontal transportation required, or is there stacking, picking, or sorting? Are the items being transported special (barrel-shaped, such as in the paper industry)? The tonnage of the forklift required, the lifting height, the length of the forks, and the number of mast levels

Direct handling costs can be reduced by more than 25% compared to manual handling

The soft brush should roll freely in the hand box

This is just pallet handling (plane movement)

The unmanned forklift moves to the corresponding point in the shelf area through straight-moving, sideways movement, turning and other actions according to the instructions of the WCS warehouse control system

BYD warehouse electric forklift maintenance and repair schedule flow chart - (4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same Multi-angle safety protection; 4 Before starting work every day, check the following safety features: ※ The speaker functions normally

If it is lower than the limited working voltage, the forklift should stop running immediately

Notice! Operating the stacking forklift at low voltage for a long time will damage the battery life

When the bending and twisting deformation of the electric forklift mast is too large and it is difficult to correct it by cold pressing, it can be corrected by heating

They are widely used in national economic sectors such as stations, ports, airports, factories, warehouses, etc

What is a forklift? Forklifts are industrial handling vehicles, which refer to various wheeled handling vehicles for loading and unloading, stacking and short-distance transportation of palletized goods

The operator must stay away from non-staff members in the counterbalanced forklift's working area and immediately issue a warning if there is any danger

7Work cycle time Automatically guide the electric truck to complete the work cycle time required

In terms of load-bearing, manual trucks rely on manpower, so its load capacity takes into account the human tolerance range, while electric trucks rely on electricity and drive wheels, so in this respect, the load capacity of electric trucks is greater than that of manual trucks

com 3

BYD warehouse electric forklift maintenance and repair schedule flow chart -

Secondly, when picking up goods, the fork must be in place, one side of the goods must be attached to the fork, and the direction must be straight and not tilted

After starting the truck, do not accelerate too hard or brake suddenly

What are the advantages of electric transport vehicles? 4

After the forklift has been operating for a specified period of time, it should leave the cold storage and rest and replace the battery in the buffer zone

The maintenance time is also much less than that of diesel forklifts, which can greatly save maintenance labor costs and effectively shorten the downtime of forklifts, which is conducive to improving the working efficiency of forklifts and improving economic benefits

When the voltage fluctuates, it automatically stabilizes the output current

Slow driving function: put the handle in a nearly vertical state, and the driving speed will automatically decrease, making it easier to achieve accurate operation in narrow spaces

The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and increases the flexibility of operation

It refers to the maximum angle that the mast can tilt forward or backward relative to the vertical state when the electric forklift is in an unloaded state on a horizontal ground

You should be careful before buying a forklift and do not trust the seller's words to avoid unnecessary trouble and loss

As for the preventive measures, they are not without them

With the development of the economy and the improvement of environmental protection and energy-saving requirements, electric forklifts are developing rapidly

The electric hydraulic truck lifts the cargo a few centimeters and confirms whether the cargo is secure

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info