盗墓笔记小说,古风小说君子以泽,辰东

BYD high-rise forklift maintenance and operation process pictures-

An electric forklift is a dual-purpose electric forklift with loading and unloading functions and short-distance transportation functions

Among them, the corrosive environment inside the forklift, such as the high temperature generated by the engine and the combustion exhaust gas containing sulfur and chloride ions, the acid mist and leakage generated by the battery, the stress generated by vibration and impact during operation, and the local damage caused by friction and collision are the main reasons for the corrosion damage of forklift parts

Due to its zero pollution and low noise, it is widely used in indoor operations and other industries with high environmental requirements Compared with traditional internal combustion forklifts, the engine + fuel + transmission system has become an electric motor + battery + electronic control system, which is mostly used for indoor operations

Finally, regardless of the price of the forklift, it is forbidden to use it in flammable, explosive places or corrosive environments with strong acidity or alkalinity

The temperature difference between the inside and outside of the cold storage will cause the vehicle body to "sweat" and produce condensed water, which will cause the structural parts to rust and damage easily Trucks are used to control the driving speed and maintain the distance between vehicles to avoid extending the emergency braking interval longer than normal, about twice as long as in cold seasons 4 stop precision When the AGV reaches the target address and is ready to automatically cut, the error value (mm) between the actual position and the position set by the program

The battery is the power source of the vehicle and should be charged in time and maintained regularly

It integrates power, braking, differential, and load-bearing in one, and has speed, temperature and other sensor interfaces, which is more conducive to intelligent control

The annual output of electric forklifts in China exceeds 300,000 units From 2015 to 2019, the output of electric forklifts in China's forklift manufacturing industry increased year by year, from 122,000 units in 2015 to 293,200 units in 2019, with an average annual compound growth rate of about 25%

Strictly follow the following rules, which are shared by BYD Forklift Editor below: 1

, here we classify them according to the driving mode of the forklift

BYD high-rise forklift maintenance and operation process pictures-

The cargo unit can be enlarged to save transportation time

In a single set of gantry, the two lifting cylinders are connected through the inner gantry to achieve mechanical synchronization

At present, green and low-carbon transformation has become a major trend of global development You don't need to measure this data yourself, the electric forklift manufacturer will provide it to you

In addition, the company is in a period of rapid growth and needs to give priority to brand promotion, so the pricing is relatively low

The high-strength and compact frame design ensures the service life of the vehicle, while ensuring the strength of the frame without increasing the vehicle's own weight

Electric trucks save time, effort, energy, cost and efficient operation

If you have purchased a forklift before and it is a second-hand one that has been around for some time, the cost of repairing it is too high, so prepare to buy a new one

With the same brushless all-AC motor, maintenance-free AC front drive, lead-acid battery/lithium battery, the price of a 2-ton ride-on forklift is only about RMB 50,000

The DC motor and hydraulic motor drive the lifting of the fork, pushing the cylinder up and down to lift the fork and goods It also has the advantages of ultra-low noise and ultra-low vibration Its implementation principle is basically the same as that of a general electric forklift, but there are obvious differences in design and component selection

If someone ignores the warning, the operator must stop the counterbalanced electric forklift operation

BYD high-rise forklift maintenance and operation process pictures-

Especially for warehouse trucks, the warehouse has a small forklift space, a dim environment, and a severely obstructed vision

It reached a price that could replace manual lifting

And the tonnage is complete, with a variety of options for three-point support and four-wheel counterweights

Move the joystick to adjust the height of the forks so that the forks are at the same height as the gap at the bottom of the cargo

Forklifts must be parked in designated locations 2 Easy to operate: The easier it is to operate an electric transporter, the more popular it is with customers 7

Box cover Removable for good visibility when in use

When an electric truck is used with a pallet, the pallet should be selected based on the load range and configuration of the electric truck and the material and specifications of the pallet

The beetle design of the fork reduces the wear of the loading and unloading tools during the loading and unloading process

Except for some companies, the overall technical strength of domestic lithium battery forklifts is not high at present

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info