辰东完美世界有声小说,殿上欢,盗墓笔记

BYD cold storage electric forklift manufacturer ranking- 3

Try to turn slowly

The battery fluid should be supplemented with distilled water in time

Warehouse forklifts are also the main tool for loading and unloading goods

Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

Air cooling must not contain flammable and explosive gases

The driver has to stretch his neck to barely find the correct position based on experience! If it is not accurate, the goods will tip over

The system has different power modes, which allows the vehicle to flexibly give full play to its characteristics under various loads, improve energy utilization efficiency, and be more energy-saving and environmentally friendly The gantry is hinged on the front axle support body and consists of a set of parallel steel frames and a sliding bracket for fixing the fork Make more comparisons and choose the one that suits you best and has the best cost-effectiveness

It is widely used in ports, stations, airports, freight yards, factory workshops, warehouses, circulation centers and distribution centers, etc

At present, the company has formed small and medium-tonnage counterweight series, large-tonnage counterweight series, storage truck series, tractor series, micro truck series, AGV intelligent storage series, aerial work platforms, cleaning vehicles, and sightseeing trucks Different types of equipment have relatively large differences in configuration and parameters, and are suitable for different places of use When there are obstacles or pedestrians on the route, the vehicle will automatically stop or give way, reducing the bumps and damage associated with handling, ensuring that the materials are transported to the designated location in good condition, and greatly reducing the uncertainty caused by manual forklifts The hydraulic synchronization solution described in this article can be applied to the design of forklifts with double telescopic gantry structures

BYD cold storage electric forklift manufacturer ranking-

It is also an indispensable tool for our warehouses in recent years

Controlling the operating speed can control the magnitude of the travel motor force

Slowly accelerate to the ideal speed Rubber wheels: The best silent effect, soft material, high resistance, high power requirements or used for carrying light goods

The lifting height of the forklift

The vehicle can be easily pushed under the base of the cargo box, and then the chassis is raised by hydraulics to lift the goods, and the goods can be dragged to move Therefore, if the budget permits, you can consider using a forklift with solid tires

Let's take a look at the lifting situation first

After confirming that there is no abnormality in the safety detection sensor at the loading point, the loading platform is lifted to the corresponding height

Solution to hydraulic synchronization problem In order to effectively improve the structural rigidity during high-position lifting, this lifting device is designed with two sets of telescopic masts, involving 4 oil cylinders

The era of manual handling is gone forever, so the purchase of electric forklifts is an inevitable result

BYD cold storage electric forklift manufacturer ranking-

The maintenance time is also much less than that of diesel forklifts, which can greatly save maintenance labor costs and effectively shorten the downtime of forklifts, which is conducive to improving the working efficiency of forklifts and improving economic benefits Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; What should I pay attention to when using an electric transport truck? 2

When there are obstacles or pedestrians on the route, the vehicle will automatically stop or give way, reducing the bumps and damage associated with handling, ensuring that the materials are transported to the designated location in good condition, and greatly reducing the uncertainty caused by manual forklifts

Lifting capacity test: Test different loads, the corresponding maximum pressure of the hydraulic system, the maximum lifting speed, the maximum lowering speed, the shortest time when lifting to the maximum stroke, and the shortest time when falling from the maximum stroke

There are mainly two types of electric transport trucks on the market: semi-electric and fully electric

Application environment: 1

The key parameters of unmanned forklifts involved in this article are shown in Table 1: Among them, in order to effectively reduce the width of the stacking channel, the minimum stacking channel width was reduced from the traditional 3 meters to 1

Electric transport forklift manufacturers tell us that generally speaking, transfer forklifts can be divided into manual, semi-mechanical and fully electric 2 This is mainly due to the high proportion of self-produced parts

Key design parameters The key design parameters of unmanned forklifts mainly include: maximum cargo weight, maximum cargo size, load center distance, minimum stacking channel width, maximum lifting height, maximum deflection of the fork end, maximum travel speed, and maximum lifting speed with full load

They fully consider the safety and comfort of the driver and combine many ergonomic designs to make it easier for the driver to get through the running-in period

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info