盛世嫡妃凤轻小说,盗墓笔记,完美世界小说txt下载

BYD Warehouse Electric Forklift Charging Precautions Warehouse- At the same time, we also noticed that in 2019, the growth of electric walk-behind warehouse trucks began to show signs of slowing down Drive system: The drive system is one of the important components of the electric forklift

When using an explosion-proof electric forklift, you should pay attention to timely and correct operation, control the forklift's travel speed, and ensure safety

, Hangcha Group Co The power supply of an explosion-proof electric forklift is provided by an explosion-proof battery

Below, the editor will briefly tell you how to prevent corrosion and rust on new energy forklifts

In terms of running speed, electric transport trucks only need to be driven by an electric motor, which is faster than manual transport trucks that are pulled by manpower

Adjustable forged forks, suitable for various materials such as pallets, boxes or paper rolls, and can meet the needs of load units of different sizes; 6

The electric truck uses a battery as the power source

Because as the height increases, the maximum safe weight of the forklift gradually decreases

At the same time, safety cannot be ignored The emergence of lithium batteries has added a highlight to the development of the forklift industry! What functions does BYD forklift have? BYD forklifts are all equipped with BYD's independently developed iron battery technology, which has the characteristics of maintenance-free, low use cost, 1 hour fast charging, and can be used at any time The uses of transport trucks produced by different manufacturers are different, which requires drivers to slowly adapt

BYD Warehouse Electric Forklift Charging Precautions Warehouse- It can also be subdivided into many types: 1 ton electric forklift, 1

The same is true for food logistics

are electric forklifts

It is characterized by no beams, high body strength and can withstand heavy loads

The annual output of electric forklifts in China exceeds 300,000 units From 2015 to 2019, the output of electric forklifts in China's forklift manufacturing industry increased year by year, from 122,000 units in 2015 to 293,200 units in 2019, with an average annual compound growth rate of about 25%

They are generally small and use hydraulic structures to reduce the difficulty of manual operation

DC motor drive As a relatively cheap driving method, DC drive has been widely used in electric equipment for a long time, but it has some inherent defects in performance and maintenance There is a tortoise and rabbit adjuster on the handle, and the tortoise speed and rabbit speed can be switched freely

■ Higher security An optional disengagement device is provided for electric forklifts to be used for towing the vehicle in an emergency

Customized equipment transportation plans, a high-tech enterprise integrating machinery and equipment research and development, manufacturing and sales

2 Lead-acid batteries are heavy, large, and of low quality, especially the charging and discharging requirements are very strict

Check whether the phase change room is clean

Mechanical structure To achieve synchronous lifting of hydraulic cylinders, mechanical synchronization is often the simplest and lowest-cost solution

BYD Warehouse Electric Forklift Charging Precautions Warehouse-

All operating functions can be easily achieved with simple buttons on the handle

BYD Forklift launched the Blue Ant series of products in 2019 - Blue Ant 15, Blue Ant MINI, and Blue Ant 20, focusing on flexibility, load capacity, and overall performance advantages brought by the three core technologies of battery, motor, and electronic control

The skyrocketing order size has put higher demands on warehousing and logistics

At the same time, in order to enhance the driver's sense of security during use, guardrails, intelligent recognition functions of pedal positions and three-speed design protection are specially installed to improve driving safety from multiple dimensions

The basic operation of an electric truck is to raise and lower the forks, and move the vehicle forward and backward Electric transport trucks are commonly used in modern factory warehouse handling work

The mast or fork frame of a reach-forward electric forklift can move forward and backward

When the vehicle is trudging, do not mistake the "Trudge" and "Evacuate" direction buttons for the turn buttons; 6

The tension of the two lifting chains should be even, without distortion, the ends should be firmly connected, and the pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced

Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; 8

Manual trucks use a manual hydraulic pump to lift and lower the equipment through manpower, while electric trucks use a power source battery, a drive motor, and a drive wheel to achieve lifting and lowering

Nowadays, electric pallet trucks produced by electric transport truck manufacturers have become very common handling equipment in factories and warehouses

Slow down before starting, slow down for a few seconds and then speed up; 5

The fill welding work starts from the drilled hole to the other end of the crack, and the weld is also welded on the reverse side

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info