玄幻小说,已完本玄幻小说排行榜,大主宰之灵路天蚕土豆

BYD CPD25 Counterbalanced forklifts Manufacturer

A good forklift should take all details into consideration to fully ensure the safety of the driver, cargo and the forklift itself

Due to the size, the design of the entire car is less playable; 2

0 tons

Among forklift companies, in addition to BYD, which was involved in lithium-ion forklift technology earlier, since 2018, many mainstream forklift OEMs such as Anhui Heli, Hangcha Group, and Noli have also actively introduced the application of lithium batteries

Forklift work safety requirements: 1

The air humidity reaches 100%, and essence is produced on the surface of the motor

Overview Forklifts are industrial handling vehicles, which refer to various wheeled handling vehicles for loading and unloading, stacking and short-distance transportation of palletized goods It is recommended to use them outdoors Energy saving and environmental protection, simple and convenient operation

, it is difficult to achieve a low selling price

The following is a brief sharing by BYD Forklift: Carry out seasonal maintenance of equipment, test the antifreeze freezing point, and make it 5℃ lower than the local minimum temperature; the thermostat opening temperature is about 82℃; the battery electrolyte density reaches 1 It is not the case that cheap ones are good and expensive ones are profiteering; nor is it the case that cheap ones are of poor quality and expensive ones are perfect Two driving modes of electric forklifts: 1

BYD CPD25 Counterbalanced forklifts Manufacturer

We always take meeting customer requirements as our business philosophy, strictly control quality, strive to improve work efficiency, and strive to provide individuals or companies with electric trucks that meet market needs

Therefore, correct maintenance has become more important, and companies and drivers need to pay more attention It has the advantages of simple and flexible operation, fast lifting of goods, high efficiency, noise reduction and no pollution

So how do we troubleshoot these faults? The following editor will give you a brief introduction

A good forklift should take all details into consideration to fully ensure the safety of the driver, cargo and the forklift itself

For high lift, visual secondary positioning is added, and accurate picking and placing of goods can be achieved in a closed environment by binding the fork teeth and the shelf, effectively solving the errors caused by deformation of vehicles and shelves after many years

Check whether the phase change room is clean The long-lasting battery endurance can keep the machine in good and optimal condition

Electric forklifts are substantially different from traditional internal combustion forklifts in terms of power, so their operating procedures are also somewhat different

From the current situation, the most popular new energy technology is still mainly based on electric forklift technology

Daily maintenance: 1

Stacking forklift is also a warehouse forklift

BYD CPD25 Counterbalanced forklifts Manufacturer

Solution to hydraulic synchronization problem In order to effectively improve the structural rigidity during high-position lifting, this lifting device is designed with two sets of telescopic masts, involving 4 oil cylinders

Precautions for using cold storage forklifts Cold storage forklifts are special equipment

Low operating cost With the increase in international oil prices, the operating cost of electric forklifts is lower than that of fuel forklifts

With the continuous development, promotion and application of logistics technology, and the continuous improvement of the country's industrialization level, the scope of use of forklift products will be increasingly expanded, becoming a loading and unloading, warehousing and handling machinery with the largest output and specifications (6) It is prohibited to pick up goods with a fork at high speed or to use the fork to collide with hard objects slow down 1

At present, BYD forklifts have been widely used in the food industry, paper industry, feed, automobiles and parts, household appliances and logistics industries, aiming to improve logistics efficiency, improve resource allocation, save logistics costs and create more economic benefits for various industries

How can the driver accurately insert the cargo when the forklift is raised so high? With an obstructed vision, the driver has to stretch his neck like a giraffe, and still relies on feeling

Hold the left and right handles of the control handle with both hands, press them down to the tilted position, and move the control handle left and right to steer the vehicle

※ The brake function is normal

Electric pallet trucks use electric hydraulic pumps for lifting and lowering, and use electronic control (chopper) or domestic resistance electronic control to adjust the travel speed

When the thickness of the friction brake pad reaches the minimum thickness allowed, the friction brake disc must be replaced

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info