小说阅读网站,好看的历史书籍推荐,管理书籍排行榜

BYD four-wheel battery forklift maintenance and operation process pictures-

Continuous breakthroughs in key technologies For a long time, the core three-electric (electronic control, motor, battery) technology of electric forklifts has been an important factor that has troubled the development of electric forklifts in my country, especially the electronic control system, which is the core component of electric vehicles, has long been monopolized by foreign brands

For example, the second-generation new electric high-speed pallet truck PTP20S perfectly combines the usage habits, working conditions and handling requirements of European customers, and designs a flip-up guardrail

Its unit is millimeters

Forklifts are widely used in warehouses, factories, ports, airports and other scenes

In a low temperature environment, the battery of an electric forklift will consume more power faster, the charging time will be longer, and the use time will be greatly shortened

If the driving control switch is loose and causes failure, lock it in time

The following is shared by BYD forklift editor: 1

The tension of the two lifting chains should be even, without distortion, the ends should be firmly connected, and the pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced

Companies in northern regions should pay more attention to this

In recent years, many brands have appeared with pallet trucks, and the forklift accessories products are endless, which allows us to have a deeper understanding of the needs of the Chinese market

Notice! Operating the stacking forklift at low voltage for a long time will damage the battery life

before working, and then operate after confirming that it can operate normally

BYD four-wheel battery forklift maintenance and operation process pictures- So, what problems are prone to occur with the plate? What are the symptoms? What are the reasons? Next, the truck manufacturer will tell you about it

Compared with traditional forklifts, electric forklifts are quiet, pollution-free, have low operating costs, long service life, and require less maintenance

(3) Hydraulic pump, which can be a vane pump Or gear pump

"Customer-oriented, technological breakthrough" In the face of this challenge, we worked with customers to conduct a comprehensive analysis and evaluation of the power drive of electric forklifts

The forks of the counterbalanced forklift are outside the centerline of the front wheels

Direct handling costs can be reduced by more than 25% compared to manual handling

When the electric transport truck is not in use, put the fork to the bottom and store it in a designated location without affecting other operations

Use the DC voltage range of the multimeter to measure the voltage across the battery

When working in multiple shifts, electric motor-driven warehouse forklifts need to have backup batteries

2 times the maximum load, the relevant test data corresponding to the lifting capacity meet the on-site requirements, and the high-position fork entry is safe and reliable

However, the biggest differences between forklift motor drive systems are as follows: 1

It is not allowed to operate with a single fork; 4

They can be divided into fully electric pallet trucks, semi-electric pallet trucks and manual pallet trucks

BYD four-wheel battery forklift maintenance and operation process pictures- 8 When driving indoors, the speed should not exceed 5km/h

Each thing has its own use

What are the operating procedures for electric forklifts? The current forklift field may already be the world of electric forklifts

When the truck starts, make sure there is no one nearby and no obstacles or potholes on the road

in various factories and mines

It is not the case that cheap ones are good and expensive ones are profiteering; nor is it the case that cheap ones are of poor quality and expensive ones are perfect

The main technical parameters include: rated lifting capacity, load center distance, maximum lifting height, mast inclination, maximum travel speed, minimum turning radius, minimum ground clearance, wheelbase, track width, etc

Disadvantages: Manual transport trucks rely on human power to pull, which consumes manpower, requires effort when the ground is uneven, and has low transport efficiency

Own weight Automatically guide the weight of the electric truck with battery

Instrumentation The power meter displays the power value when working normally, reflecting whether the battery power meets the requirements

The only variable is the minimum turning radius of the forklift, which is a value that companies need to pay special attention to

When the vehicle is trudging, do not mistake the "Trudge" and "Evacuate" direction buttons for the turn buttons; 6

Electric pallet trucks are driven by electricity, and the movement is controlled by the switch on the handle of the operating arm, and the steering is controlled by the operating arm Based on the market application scenario, the key parameters, safety detection, and storage action flow of the product are first designed overall; then, for the hydraulic synchronization problem in the lifting system, specific design schemes are proposed from the mechanical structure and hydraulic system aspects; finally, the feasibility of the scheme is verified through prototype testing

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info