千年殇,女人书籍排行榜,遮天

BYD tractor maintenance specifications latest- (5) Throttle valve, installed in the pipeline of the lifting hydraulic cylinder, its function is to increase the flow resistance of the oil, and ensure that the fork descends slowly when the lifting hydraulic cylinder releases pressure AC motor drive The AC drive system with AC motor as the core has the characteristics of high production efficiency and low maintenance cost

The key processes of the entire production line are equipped with the industry's latest production equipment, and are also equipped with self-developed automatic assembly lines, representing the current leading level of equipment technology

They are efficient and safe 3 Speed regulating device It operates normally at 24V voltage and the speed is adjusted by electronic control

At present, most battery forklifts, stackers and transporters on the market use lead-acid batteries

Before lifting the forklift, make sure the forklift is fully inserted into the bottom of the pallet

Product layout continues to deepen In fact, my country's electric forklift market has shown a high growth trend since 2017, with sales increasing by 43

When turning left, the vehicle turns left; when turning right, the vehicle turns right

If you still have questions, you can consult the electric transport truck manufacturer

BYD tractor maintenance specifications latest-

Of course, practice makes perfect, but it also takes time

Rubber wheels: The best silent effect, soft material, high resistance, high power requirements or used for carrying light goods

Fault 5: Power consumption is fast and cannot be charged Check whether the battery solution of the electric transport truck is sufficient, and add distilled water or lead-acid water in time; check whether the battery is aging, and replace it with a new one in time; check whether the equipment charger is faulty, and use a charger that matches the equipment model

The market demand for electric forklifts will grow faster and faster, and the market share of electric forklifts will grow larger and larger

Key design parameters The key design parameters of unmanned forklifts mainly include: maximum cargo weight, maximum cargo size, load center distance, minimum stacking channel width, maximum lifting height, maximum deflection of the fork end, maximum travel speed, and maximum lifting speed with full load Lithium batteries are a type of battery that uses lithium or lithium alloys as negative electrode materials and non-aqueous electrolyte solutions

Overloading is not allowed; 5

The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and increases the flexibility of operation

Load test: The four loads have the same load center distance, and the weight is gradually increased according to 50%, 70%, 100%, and 120% of their own load capacity

direct and convenient, and the maintenance performance is better than that of horizontal motors

Product Introduction: 1 (3) During the loading and unloading process, the forklift must be braked

BYD tractor maintenance specifications latest- What are the advantages of lithium battery forklifts? With the development of society and the advocacy of environmental protection in various places, there are more and more energy-saving products on the market

Electric warehouse forklifts, explosion-proof forklifts, container stackers, off-road forklifts and other mid-to-high-end products are also representatives of high technology content and high added value

Based on the above problems, this paper proposes a design scheme for a narrow channel side stacking unmanned forklift (hereinafter referred to as unmanned forklift)

When we usually repair forklifts, we often find that many customers' forklifts are rusted or even corroded It has the characteristics of strong safety, convenient operation and high reliability

When opening the process holes of the chemical pretreatment workpiece, pay attention to prevent liquid accumulation

Electric transport trucks are also called electric pallet trucks, and manual transport trucks are also called hand trucks, ground bulls, etc

Hydraulic system In terms of hydraulic synchronization, in order to avoid uneven loading of goods, uneven force on the four cylinders, and asynchronous movements, a gear-type hydraulic synchronous motor (also known as a split-flow motor) is designed at the center of the four cylinders

They are the best choice for weighing goods moving over short distances When approaching the goods, it should stop first, wait until the position is clear, and slowly align the double forks with the goods

It involves a complete set of system matching and technical support

When cracks appear in the welding parts of the body of the electric pallet truck, secondary welding should be carried out in time

It is preliminarily estimated that the national output of electric forklifts in 2020 will be about 380,000 units Factory operators are basically able to operate the equipment skillfully, but rarely can they solve the faults in the use of the equipment in a timely manner

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info